dobermandave2004
New Member
thanks guys
i'll give it a go next weekend
if it works i'll post some piccys
i'll give it a go next weekend
if it works i'll post some piccys
It's the top of the windscreen frame that contacts the bonnet, not the glass. I stuck a bit of draught excluder to the top of the windscreen frame to protect the bonnett paintwork. That's all you need.![]()
seatbelt is bolted to the top of the centre bulkhead, behind the seat.Nice one, want to do that to my 90 when i get round to buying one. Out of interest, what you do about wearing a seat belt, do you just not wear one? Just because I cant think what you would fit it to, unless odviously fitted a roll hoop.
BUMP
I want to do this mod for my ex-MOD 110 soft top
No windscreen is a clear winner when out on the farm.
On road it feels like a speed boat for a while and then sucks when you have to go fast. At that point windscreen+ipod are game changers.
What is needed to do this?
From what I have read on this forum its:
- Craddox hinge kits for lower windscreen bolts
MXC7847 WINDSCREEN HINGE 90/110 LH. £14.75
MXC7846 WINDSCREEN HINGE 90/110 RH. £ 12.75
- cut rubber seal to allow for pivot
- wiper blades just pull out?
- I will rest windscreen frame onto bonnet wheel, so no scuffing issues there
is it that easy?
Summer's coming early and want the vibe