Bump

Bump

Well-Known Member
Events Planner
Don't think this exists yet but i think it should. There are a number of specialist tools out there, sometimes we buy them, sometimes we can't afford to. Is it worth having a on-going thread running where people can ask for specific tools and local people can respond?

Reason for suggesting this is because i am after one of these:

282547.jpg


To tighten a very very awkward nut. I can't afford to go out and buy a full set at present, but, could really do with borrowing one to do one job. Anyone local in the South Derbyshire / Derby area who would be as kind to lend me one would be appreciated. Even willing to drive over, use it, hand it back and leave again if you don't want to loose sight of it!

Can't remember the size but will check when i get home :)
 
would a 1/4 crow foot do the job ? - happy to send you some

[ame=http://www.amazon.co.uk/gp/product/B000RA02H4/ref=olp_product_details?ie=UTF8&me=&seller=]Sealey AK599 Crow's Foot Spanner Set 8pc Imperial: Amazon.co.uk: Garden & Outdoors[/ame]
 
wow, they look good, never knew they even existed. I am, however, doubtful if they will do the required job, i shall check when i get home, thanks.
 
Bump said:
wow, they look good, never knew they even existed. I am, however, doubtful if they will do the required job, i shall check when i get home, thanks.
Click to expand...

Halfords sell them individually - so it might be even cheaper than driving somewhere to get a loan of one
 
Bump said:
Don't think this exists yet but i think it should. There are a number of specialist tools out there, sometimes we buy them, sometimes we can't afford to. Is it worth having a on-going thread running where people can ask for specific tools and local people can respond?

Reason for suggesting this is because i am after one of these:

282547.jpg


To tighten a very very awkward nut. I can't afford to go out and buy a full set at present, but, could really do with borrowing one to do one job. Anyone local in the South Derbyshire / Derby area who would be as kind to lend me one would be appreciated. Even willing to drive over, use it, hand it back and leave again if you don't want to loose sight of it!

Can't remember the size but will check when i get home :)
Click to expand...

might sound silly but will a bent el-cheapo spanner not do the trick?
 
Beast o Bodmin said:
wot you got to spanner then?them have a wide case around the ratchet and require space around the nut..
Click to expand...

Its the drivers side nut to engine mount. There's lots of stuff in the way to get to it and very little space to actually turn a spanner (hence the ratchett end of a multi point thing would work well as you can turn it a small amount at a time)

You can't put a normal spanner on as there is things like the chassis in the way and the angle on the thread is wrong to get a socket on it as the engine gets in the way.

I've currently used two normal nuts done up as tightly as possible with fingers... so not ideal.


a normal bent spanner may work
 
i bought some of those bendy rachet spanners from halfords a month or so ago they was half price mind i fink they got chucked in the wrong toobox as i ant seen them since
 
robint said:
i bought some of those bendy rachet spanners from halfords a month or so ago they was half price mind i fink they got chucked in the wrong toobox as i ant seen them since
Click to expand...

Bollox. I bet you got pikey to stick pikey em for you for half the usual price they charge in store.:p:p:p
 
ratty said:
I'm thinking wobble extensions anorl. I would say U/J but they aint really that much cop for doing summit up tight tight.
Click to expand...
No you literally can't get a socket on let alone a wobble thing on it to then connect to a bar and the ratchett - the angle of the stud is basically pointing directly at the engine.

I did manage to get a socket on once, and had to lift the engine out again to get it off :doh: and even when on it was right against the engine so couldn't get anything into the hole on top
 
the engine mount on the side of the engine bump?or the mount to chassis.either way you got to get a socket in there and do em up proper tight.the tdi will shake its self to bits otherwise.there a tw@t to do.
 
Sirus said:
Stubby spanner?
Click to expand...

Space issues again - the angle it would come off the nut fires it right into the water pump i think (something anyway) so it would have to be about 3cm long to work...!
 
Beast o Bodmin said:
the engine mount on the side of the engine bump?or the mount to chassis.either way you got to get a socket in there and do em up proper tight.the tdi will shake its self to bits otherwise.there a tw@t to do.
Click to expand...

Is I wanna90 giving you the answers again?:p
 
If you can't get on it with a normal combination spanner the ratchet wobbly head one ain't gonna help there for speed more than anything else
 
Beast o Bodmin said:
the engine mount on the side of the engine bump?or the mount to chassis.either way you got to get a socket in there and do em up proper tight.the tdi will shake its self to bits otherwise.there a tw@t to do.
Click to expand...

Mount to chassis - got the rubber thing fastened up nice and tight to the chassis and the bracket on the engine nice and tight - its just the nut which fastens down to hold the bracket to the rubber engine mount - one side is very tight... t'other is not yet.
 
You must log in or register to reply here.

Similar threads

Nyal
Freelander 2 (LR2) Stuck oil filter housing
Replies
6
Views
687
Nodge68
Nodge68
L
Black & Decker BD 195/6 compressor
Replies
0
Views
735
lrmonks
L
J
Driving 1700 miles Altrincham to Estepona Spain in 90 2015
Replies
13
Views
858
lightning
lightning
PopPops
Disco 2 Pipe unscrewed itself from FPR
Replies
2
Views
550
PopPops
PopPops
Keith_L
Disco 2 3 Amigos - sort of
Replies
3
Views
730
Keith_L
Keith_L