LandyMan

Well-Known Member

• Apr 9, 2014

• #1

Hello, my name is Neil and I only signed up here the other day.

I know there are plenty of decent threads for what I am about to ask / do, but I was wondering if anyone here is from Leicester that might be able to add a helping hand.

I need to replace my rear diff mounts, I have read the thread that explains it, but I am a little worried about doing it on my own.

I haven't got a decent jack, any ramps, or axle stands either.

Would anybody be prepared to lend me some? otherwise I will have to buy them (which would be a good thing) but money is a little tight at the moment.

Any help / advice would be very greatly appreciated.

Thank you

 

M

matt1295

New Member

• Apr 9, 2014

• #2

if i was you id go to the introduce ya section first before essex or pitbull arrive lol

then list your location as to where you are to see what members are local to you

 

bushwwacker

Well-Known Member

• Apr 9, 2014

• #3

Telh. Check new posts.

 

R

RichAllen

New Member

• Apr 9, 2014

• #4

Are you wanting to replace all three?

Where abouts in Leicester are you?

Cheers

Rich

 

LandyMan

Well-Known Member

• Aug 14, 2014

• #5

Apologies for the delay.

I can happily say that I fitted them the day after i posted this (went halfords and bought some ramps), it was really easy (a lot easier than I expected) and no I no longer have any banging noise when pulling off in 1st and 2nd gear.

No I have a strange sort of metal clicking behind the rear seats that I need to fix.

 

R

Richard Martin

Well-Known Member

• Aug 14, 2014

• #6

NDavies said:

Apologies for the delay.

I can happily say that I fitted them the day after i posted this (went halfords and bought some ramps), it was really easy (a lot easier than I expected) and no I no longer have any banging noise when pulling off in 1st and 2nd gear.

No I have a strange sort of metal clicking behind the rear seats that I need to fix.

Click to expand...

Yoh should read this http://www.landyzone.co.uk/lz/f38/freelander-tech-bulletin0112-creaking-rear-75223.html

 

LandyMan

Well-Known Member

• Aug 15, 2014

• #7

Thank you very much Richard, that must be the problem!!

I will have a look this weekend and let you know the outcome.

Thanks again

 

LandyMan

Well-Known Member

• Aug 15, 2014

• #8

found this

Freelander Owner: Cracked Chassis

 

john t

Active Member

• Aug 19, 2014

• #9

yes correct cracked chassis, easily repaired without welding

 

john t

Active Member

• Aug 19, 2014

• #10

www.landyzone.co.uk/.../cracked-chassis-repair-no-welding-243704.html

 

LandyMan

Well-Known Member

• Aug 22, 2014

• #11

thanks, that link does not work though

 

GrumpyGel

Well-Known Member

• Aug 22, 2014

• #12

Here, try....

UK Based Land Rover Forum, Land Rover Gallery and Land Rover Links. - Search Results for cracked-chassis-repair-no-welding

 

LandyMan

Well-Known Member

• Aug 26, 2014

• #13

Thanks

I cut a hole in my boot floor yesterday and found the bolt.

I took the bolt out and had a good look.

There is no crack in the chassis, and no rot, everything looks really good.

However, I did notice that the square nut fits into another square that is fixed to the chasis, the smaller square is really small and moves around inside the larger square.

I drilled 4 holes in each corner of the larger square and down into each corner of the smaller square, I then filled the holes with some weld, put it all back together, and hey presto, no more cracking

WAHOOO

Thanks for everyones help!