F

flat cap andy

Active Member

• Apr 17, 2014

• #1

What ya Disco divas, I have a question....
You know those small black fuels lines/pipes that push fit at the top of the engine? Not the main pipes. The one that returns(?) fuel from the injectors to the fuel pump for instance...Is there a secret way to getting them to push home?
Mine broke, fuel everywhere I trimmed the line as the break was close to the end of the pipe but pushing it home seems impossible!!
Any thoughts? Oh it's a 200tdi by the way.
Ta Andy

 

C

cableliquid

Member

• Apr 17, 2014

• #2

heat it up with a lighter and then push it on. i use pliers to push them on.

 

landowner

Pensioner Pete

Full Member

• Apr 17, 2014

• #3

I dip them in a cup of hot water to soften them up and then they cool and seal when fitted

 

ratty

I'm not special I'm limited edition

• Apr 17, 2014

• #4

landowner said:

I dip them in a cup of hot water to soften them up and then they cool and seal when fitted

Click to expand...

+1. Hot water for me too.

 

700Quid

Active Member

• Apr 17, 2014

• #5

cableliquid said:

heat it up with a lighter and then push it on. i use pliers to push them on.

Click to expand...

A lighter... on a fuel line :flame: .... :crazy:

+2 on hot water

 

F

flat cap andy

Active Member

• Apr 21, 2014

• #6

Tried the hot water method and the plastic was so brittle that it snapped again so gave and bought some 4mm rubber line and two clamps and that seems to have done the trick!