Baileyroverq

Active Member

• Mar 13, 2016

• #1

Hi all does anybody know what size or where I can get the 3 bolts for the thermostat housing on a 2.5 dse as stupidly whilst changing thermostat I sheared on off in the engine side have got it out with patience and mole grips but now need new bolts to finish job off typically everything else was going great upto this point any help is appreciated thanks

 

allanw

Active Member

• Mar 13, 2016

• #2

Look around the front bonnet slam panel area. There may be one you can remove and " borrow" for an emergency. Then replace a s a p.

 

Baileyroverq

Active Member

• Mar 13, 2016

• #3

Oh great thanks for that will have a look

 

wammers

No longer with us, RIP

Donater

• Mar 13, 2016

• #4

Baileyroverq said:

Oh great thanks for that will have a look

Click to expand...

STC2347 or LR007746. Or any good quality all threaded bolt M6x25. If you use plain bolts fit a washer.

 

Last edited: Mar 14, 2016

Baileyroverq

Active Member

• Mar 14, 2016

• #5

Thanks for that wammers I'll get some ordered