J

Jonnygearbox

Active Member
Since the week the land rover was bought (over a year ago now) a general clean up was given to it, but it never was good enough, so after a galvanised chassis, respray, poly bushes and some preventative maintenance it seems to be getting there. BTW it also has a jaguar dual horn instead of the little bamp bamp horn it used to have.

Here are a few pictures of how it sits now. Enjoy

101_0101.jpg

101_0104.jpg

101_0106.jpg

101_0107.jpg

101_0108.jpg

101_0109.jpg

101_0110.jpg

000_0001.jpg

101_0119.jpg

101_0120.jpg

101_0112.jpg

101_0111.jpg

101_0116.jpg

101_0115.jpg

101_0114.jpg
 
Very nice, looking straight in all the right places,

Only thing i would change is remove the snorkel,

It reduces the engine efficiency
 
Yes indeed it does go up hills, it is not used for laning but it is used for shooting and driving up fields/hills to get to certain hunting grounds :)
 
Top job she is a beauty !! You might want to invest in a quick release steering wheel!!!
Hard to steal it without a steering wheel!! Saved my own Landy from scumbags twice now!!!
 
I forgot to add, this is the vehicle in this months land rover monthly magazine getting a chassis swap. it was also in last months aswell :)
 
believe it or not it was covered in the stuff before i washed and dryed it :) btw im a trained detailer so she is kept in order :)

i forgot to add poly bushes where added but because i did not have any black paint left the arms where just cleaned up from the crust of rust and they need to be taken back out and given another go over with the wire wheel before they are primed and sprayed black :)

but once that is done ill add more pictures to the thread :)
 
Last edited:
Jonnygearbox said:
believe it or not it was covered in the stuff before i washed and dryed it :) btw im a trained detailer so she is kept in order :)

i forgot to add poly bushes where added but because i did not have any black paint left the arms where just cleaned up from the crust of rust and they need to be taken back out and given another go over with the wire wheel before they are primed and sprayed black :)

but once that is done ill add more pictures to the thread :)
Click to expand...

In that case I will bring mine to you for a good going over
 
little update, the axels and things underneath with be cleaned from waxoyl and then it will be getting painted up to stop the rust coming through and to make it nice looking underneath
 
You must log in or register to reply here.

Similar threads

Jamscone
SOLD - P38 Range Rover v8 4.6 litre HSE 109,000 miles - £1800
Replies
1
Views
1K
Jamscone
Jamscone
DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
1K
miktdish
miktdish
P
New front radius arm bushes - recommendations?
2
Replies
21
Views
3K
Dr Strangeglove
D
D
Steve's Land Raft
5 6 7
Replies
123
Views
15K
Dauphproto
D
lightning
Drove a Series 3 today
2
Replies
31
Views
4K
lightning
lightning