instantsquid
New Member
Sounds good - you won't regret it. It's pretty straight-forward from now on.
instantsquid
New Member
You're just tempting fate now! 
m35reo
New Member
oil cooler pipes are worth getting made, you got an agri engineer up near you? they should do it cheep nuff.
if your handy with a welder just make the down pipe with sections from the old down pipe and the disco jobby, thats what i did with mine, took couple of hours but works fine.
intercooler hoses are worth getting, i did my own and it was a bit of a faf tbh.
just noticed your only up the road from me, if you want to double check anything against mine your more than welcome fella.
if your handy with a welder just make the down pipe with sections from the old down pipe and the disco jobby, thats what i did with mine, took couple of hours but works fine.
intercooler hoses are worth getting, i did my own and it was a bit of a faf tbh.
just noticed your only up the road from me, if you want to double check anything against mine your more than welcome fella.
pricey
Active Member
cheers m35reo i have got another here to study thanks for the offer , as you are from dol have you got any decent lanes around there for a couple of novices to try out , i have been up the bwlch where they watch the low flying and saw a few motocrossers going on a track and have always wondered if its a greenlane
