F

fennell

Member

• Feb 9, 2014

• #1

hi all
i have done some work on my td5 i changed the injector seals and washers, fuel regulator, fuel pump, crank sensor, fuel filter, air bleed valve and injector harness. i took it in to do this as it was rough starting and was told it was the injector seals. now i have done all this it starts and struggles to run for a few moments then conks out i have tried all ways to bleed and even towed it, any advice on this would be much apreciated many thanks.
matt

 

F

fennell

Member

• Feb 10, 2014

• #2

Hi
forgot to add its a discovery . Also if the injector valves arent adjusted correctly would this make it happen
cheers
matt

 

DIFFLOCK66

Well-Known Member

• Feb 10, 2014

• #3

No idea, sorry, but have you tried posting this in the Discovery section?

 

F

fennell

Member

• Feb 10, 2014

• #4

hi
no mate i will repost it there now i didnt see a discovery section last night lol cheers

 

ratty

I'm not special I'm limited edition

• Feb 10, 2014

• #5

fennell said:

Hi
forgot to add its a discovery . Also if the injector valves arent adjusted correctly would this make it happen
cheers
matt

Click to expand...

if the injector ports weren't cleaned properly or if non genuine parts were used it is highly likely the fault is still the injector washers.