S satchmolips Active Member Feb 17, 2022 #1 Hi all If I suspect this is faulty how do I isolate it? Just unplug it??
lightning Well-Known Member Feb 18, 2022 #2 Will the engine not start? The inertia switch is a normally closed switch and if it's triggered the engine will turn over but it won't start. You can short it out to bypass it.
Will the engine not start? The inertia switch is a normally closed switch and if it's triggered the engine will turn over but it won't start. You can short it out to bypass it.
marjon Well-Known Member Full Member Feb 18, 2022 #3 Does the intank pump run? Just put a meter across the pins and check it looking at the dia it would appear it disconnects power to the relay if its activated. From a 2002 manual. J Attachments TD5 wiring inertia switch.pdf 247.3 KB · Views: 340
Does the intank pump run? Just put a meter across the pins and check it looking at the dia it would appear it disconnects power to the relay if its activated. From a 2002 manual. J
