john t
Active Member
last year i had an issue with the td4 engine non starting, its a long story if you search for my thread, it turned out to be a snapped crankshaft
to determine if the injectors were working ,i removed the injectors and arranged them as shown in the photos,
i also set up the cam position sensor as shown in the photo, if the can sensor dose not get its pulse the injectors wont operate
on cranking the engine , i could see that the fuel was getting to the injectors and you can see the fuel mist in the bottles, this might be of interest to someone hence the reason for posting, its quite easy to set up ,
to determine if the injectors were working ,i removed the injectors and arranged them as shown in the photos,
i also set up the cam position sensor as shown in the photo, if the can sensor dose not get its pulse the injectors wont operate
on cranking the engine , i could see that the fuel was getting to the injectors and you can see the fuel mist in the bottles, this might be of interest to someone hence the reason for posting, its quite easy to set up ,
