had it fitted to me fender and found it worked really well,you also had the option to link both batteries when winching aswell
it was easy in a fender as both batteries were next to each other all additional cable was included in the box,with the disco you will put a battery either side of the engine there may still be enough wire but im not certain,get some welders cable of ebay its cheaper than so called winch power cable..Was it quite easy to install or do you need to get the battery wires made up by an auto electrician??
Thanks for the help mate, this is my first time at two battery setup
if you nuy the newer model it has built in vu display on each battery to show voltage,the old one didnt
are you on about power from the solenoid to the battery?
You need to use megafuses.
I have the winch fused at 150amp, both battery links to the relay fused at 100 amp beciasr the relay is 120amp so there is some safety margin.
You don't NEED to fuse the link cables, but if one were to wear though you would end up with some kinda acid drenched fireworks display under your bonnet.
The megafuses are available with nice clip together modular holders which neatens it up.
See here:
Not the clearest but you can see them top right of the picture.
Cheers
but it does make sense to have it sorted from the outset.
