dan_vtec

New Member

• Apr 7, 2009

• #1

hi all, just noticed today my swivel ball on drivers side is leaking, done a search but cant find anything on how to swap em.......is it a haynes manual job or does anyone know of an online guide?

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Apr 7, 2009

• #2

look in the Q's and A's section - i believe Buster has done a good write-up.

 

dan_vtec

New Member

• Apr 7, 2009

• #3

top man cheers

 

Pyper28

Active Member

• Apr 7, 2009

• #4

yep buster's photo guide is very good, just done the job at weekend, main swivel seal and swivel bearings because i had shattered bottom swivel bearings and there was play in the swivel which caused the leak, if you need any advice please feel free to ask.

 

B

Beast o Bodmin

Banned

• Apr 7, 2009

• #5

Q.do you get virgin wool from ugly sheep?

 

hughesy

Well-Known Member

• Apr 7, 2009

• #6

You might try draining the oil out of the swivel housing and replacing it with one shot grease. If the leak isn't too bad it might cure it.

 

dan_vtec

New Member

• Apr 7, 2009

• #7

hughesy said:

You might try draining the oil out of the swivel housing and replacing it with one shot grease. If the leak isn't too bad it might cure it.

Click to expand...

its not to bad just noticed a small ammount of oil on the inside of the tyre today.

 

hughesy

Well-Known Member

• Apr 7, 2009

• #8

Make sure it isn't brake fluid. If it is swivel oil it's quite a bad leak if it's making it onto the tyre usually it just oozes around the swivel housing itself. Worth a try with the one shot though it cured quite a bad leak on my 110.

 

dan_vtec

New Member

• Apr 7, 2009

• #9

hughesy said:

Make sure it isn't brake fluid. If it is swivel oil it's quite a bad leak if it's making it onto the tyre usually it just oozes around the swivel housing itself. Worth a try with the one shot though it cured quite a bad leak on my 110.

Click to expand...

you got me thinking now, it could be brake fluid as ive swapped the clutch master cylinder again today as the one i got was faulty lol. maybe a bit has got down to the tyre. it looks reasonably clean round the swivel.