Hello,

Can anyone suggest a good source for replacement bushes (panhard, radius arm etc)? Should I go for poly or rubber?

Cheers!

'97 RR P38 4.0SE Manual, UK spec.

Any of the 'on-line' retailer will be able to supply you.

Personally for off-road usage I would recommend sticking with Genuine rubber bushes. If you do decide to go with Polys then get the SuperPro ones. A bit more expensive, but they are much better.

Cheers Andy. Our regular roads around here are potholey and generally cr*p surfacing but I don't off-road much anymore. I'm looking for the smoothest ride I can get is all. Shall google superpro right away.

Two sides of the coin here....Nothing wrong with original rubber bushes-if they are good enough for Army LR Defenders, they can't be bad. Downside is that you need to either cut them to get them out, or preferably use a press, and ideally press the new ones in. Once the original bushes are removed, poly bushes are a doddle to fit and a piece of cake to renew with no special tools or equipment required. I have used both types, original rubber and polybush "Comfort" and to be honest I could not notice any difference for normal on road use