R

redrange

New Member

• Jun 29, 2007

• #1

HELP! yes help required, my sunroof dont work, it dont need resetting before any one says so, it dont work, dont move. i get sunroof not set message in message centre, i have changed switch pack, dont work, i have fitted my motor to another P38, it works, i have power to it in only one possition, not the other when connector disconnected from.
so apart from the motor, switch pack and the fuse (No13 20amp) being ok what have i missed, apart from BeCM, as im hoping i have missed something, and its not the BeCM.

 

alarmfitter

New Member

• Jun 29, 2007

• #2

you can wire it to work from another switch just using the two main motor wires if you cant solve the problem and it will tilt and slide

 

R

redrange

New Member

• Jun 29, 2007

• #3

well yeah i know that, thanks but i realy wanted it to work propper so it shuts as i walk away, and it dont double lock without sunroof set, not from remote anyway!

 

alarmfitter

New Member

• Jun 29, 2007

• #4

my mate jon at london range rover will put it on his computer and tell you exactly what is wrong he is in charlton you may well know of him.0208 293 9091 i hope that helps

 

R

redrange

New Member

• Jun 30, 2007

• #5

thanks i may do that.
i just had a look at the BeCM connectors for sun roof and i can hear a relay clicking inside but only for one direction of switch movement, roof still not working, couldnt hear anything before!!