chrisyleigh

chrisyleigh

Active Member
Ive seen it on somebodys thread
Where they put a sub where the dinky seat used to be
Just looking for the thread and how it was built ect
 
I do not know how relevant it is, but if you have never done an ICE instal before, a copy of Haynes I.C.E https://www.google.co.uk/url?sa=t&r...xdxNd4jwImH9e2k1A&sig2=GNR_3Z8O-NvTx9iRBFxm1w

Is worth every penny.

I used to do a lot of SPL installs and this book was a godsend when I started.
Lots of neat little tips and tricks to do a good job.
One thing I would recommend if you are putting a Sub in a Disco is use Sound deadening, they rattle like mad!

Hope it may be of some help

Shirl
 
I already have a twin 12inch 1800w system but its just in a box in the boot using alot off space
Just think its a wise idea to put them in place off the dicky seats
Am familiar with sub electrics ect just not the best with woodwork
But I think ive found what I need in his thread just needed a refresh on it thats all
 
Depends how you have it set up I hace mine on I think 40posts per page and think it was 2 or 3
Its only in the first few pages
 
Ahh so it's just the front and top not a full box and you used the lower seat brackets too,good thinking batman.

Ill try and copy it but I'm bound to cock it up lol
 
Quick question the amps under the seat why there?
Take it you have a longgg speaker wires going to the subs now
What thickness of would did you use ? Cheers
 
Got my amp bolted onto the rear door, as I have replaced the normal subs for better versions and just used the box and spaces that were there (although I did need to make the holes bigger in the door to accommodate the new subs ;)

Also replaced the small rear pillar speakers for nice 6x9's too :D
 
Well I have a plan for my sleeping / storage platform
Its all measured out ect juat need the would
Doing it all in 18mm ply
 
flatline said:
Ahh so it's just the front and top not a full box and you used the lower seat brackets too,good thinking batman.

Ill try and copy it but I'm bound to cock it up lol
Click to expand...

And the top mounts too.

100_3733.jpg


100_3731.jpg
 
chrisyleigh said:
Quick question the amps under the seat why there?
Take it you have a longgg speaker wires going to the subs now
What thickness of would did you use ? Cheers
Click to expand...

Historical - the 250w was the original, now the 500w (bloody tight squeeze) sits there. All of the wires were in place already.
 
You must log in or register to reply here.

Similar threads

M
Disco 2 Tailgate subwoofer connection
Replies
3
Views
1K
misha_pl
M
Firebobby1
Disco 1 Saggy seat
Replies
11
Views
1K
Firebobby1
Firebobby1
D1Nut
97 D1 Electric Seat base removal in situ - where your bum sits on
Replies
3
Views
558
DiscoRay
DiscoRay
F
Help with seat cover advice please!
Replies
1
Views
205
thefrog
thefrog
F
brake caliper bleed nipple repair kit
Replies
1
Views
646
psychmarz
P