SpagettiDefender
Member
I am currently tying to figure out how to get a Saden AC mounted up. It's been a struggle to find JDP10026. I think I have a line on one....I am sure I'll get a "no longer stocked' email soon.
FloridaDefenderMPI
New Member
Any luck on the AC install? I am currently dealing with a coolant leak. I'm looking for a replacement crossover pipe
SpagettiDefender
Member
The cross over pipe had to be custom. I am out of the country for a while and I won't have any pictures of that until I get back.
The AC is coming along. I am likely going to have a custom bracket made that would mount up where the factory one was supposed to. On the T16 NASP, I believe I've identified 3 different mounting locations. For the Defender, the best place is the top right. The other two locations are bottom right and left middle as you look at the front of the engine.
sergiod90 carabinieri
New Member
Hello, I have a D90 ex-carabinieri, I have an intermittent problem that only occurs when I take a highway and after about 20 to 25 minutes, it starts to emit smoke that is between white and blue. I stop and wait about 3 minutes and it stops smoking. The temperature is fine, the engine remains stable, it's just the smoke that comes out. Do you have any idea what it might be? I'm trying to find the PVC/PCV valve but I can't locate it in the engine, does anyone know? I think I will start with that valve as it could be a possible issue.
sergiod90 carabinieri
New Member
Hello, I would like to rebuild my engine, pistons, rings, valve covers, etc... could you let me know where you got the parts? Thank you.
Its a T16 engine and parts are still available, sure I posted a link here or somewhere else.
Search for MG Rover T16 spares.
I dont know if it has a PCV, I will check the manual I have. Its a Discovery manual but it covers the 2.0mpi free from the internet.
J
