deaftonewonder
New Member
Not for that bit i dont think m8 but if anyone knows different will be interested as mine are going the same way!
Station House
Well-Known Member
Not seen one
Should be OK removing door card, cleaning back to good metal (wire wheel) and bonding in ali mesh from inside and then filling smooth
Should be OK removing door card, cleaning back to good metal (wire wheel) and bonding in ali mesh from inside and then filling smooth
currymunster
Well-Known Member
I'm not saying filling it won't work as I did not do mine and it may have been a crap job.
But with opening and closing it rattles the filler loose, especially there by the latch!!
I've got mine to do which look worse than yours. I did want to get a new door but the price is just soooooooooo much!!!
So it looks like I'll have to repair!!!
James
But with opening and closing it rattles the filler loose, especially there by the latch!!
I've got mine to do which look worse than yours. I did want to get a new door but the price is just soooooooooo much!!!
So it looks like I'll have to repair!!!
James
Station House
Well-Known Member
Did mine with fibreglass mesh (p40) to secure the mesh rather than filler filler
Has stood up to 3 years of door slamming so far
Agree Plastic Padding or similar would likely crack out quite quickly
Has stood up to 3 years of door slamming so far
Agree Plastic Padding or similar would likely crack out quite quickly
The Ferkin BoB
Banned
cut the rusty metal out with a dremmel or plasma cutter then weld in new bits cut to size smooth and repaint.
Station House
Well-Known Member
That be the bestest way
currymunster
Well-Known Member
Thats exactly what I'm gonna do with mine - weld it.
Get some pictures if you can, I'm sure we would all like to see.
James
paddy700d
Active Member
My time is free to me and as they say a fool and his money are soon parted and I'm always bloody skint at the moment (which must mean I'm a total fool
) repairing seems to be the way forward and I won't need to repaint it, plus there's something better about having something you've repaired yourself as opposed to just bolting an new one on.I was watching one on ebay its up at £48 with 2.5 days to go :doh:
currymunster
Well-Known Member
Hi folks,
I'll be doing some door repairing soon but the upper door is a bit :lol: rotten
It's obviously the second door on a 110 CSW but I'd guess its the same profile as a normal 110 front door. Can you get a repair panel for that bit?
Cheers,
Paddy
Thought you might like to see mine so you can smile safe in the knowledge that you're not the only one
Oh dear Hey :doh:
James
