discogal · Nov 21, 2012

I haven't trawled thru all of the 200tdi section but haven't been able to find any reference to a really squeeky heater fan. Does anybody know how to cure it so that it doesn't sound like fingernails down a blackboard? I need to sort it pretty quick before I go completely bonkers!:crazy:

ER1C · Nov 21, 2012

Spray some WD in there perhaps...

ricc · Nov 21, 2012

if its a 200tdi disco its apparently a day to take the whole dashboard apart to get the fan out to replace it.
mine eventually stopped working so ive got a fan sat on top of the dash plugged into the cigar lighter to demist the screen ... still get some hot air out the heater when moving but not a lot.

Sakura Compact Plug In 12 Volt Car Fan Cooler with Screen Mount Black | eBay

if it gets chilly might have to try one of these
12v Volt CERAMIC Fan Warmer Heater Car Van Camper Boat Windscreen Demister BNIB | eBay

Andy Land · Nov 21, 2012

I bought one of those ceramic heaters ... it was as useful as a chocolate fireguard!

Funkykipper · Nov 21, 2012

Andy Land said:
I bought one of those ceramic heaters ... it was as useful as a chocolate fireguard!

Mine is tiptop. Clears the windscreen in a few minutes.

Yours must be crap.

discogal · Nov 21, 2012

Andy Land said:
I bought one of those ceramic heaters ... it was as useful as a chocolate fireguard!

Yep I agree , I had one in a Bedford Rascal a few years ago and it was useless

discogal · Nov 21, 2012

ricc said:
if its a 200tdi disco its apparently a day to take the whole dashboard apart to get the fan out to replace it.
mine eventually stopped working so ive got a fan sat on top of the dash plugged into the cigar lighter to demist the screen ... still get some hot air out the heater when moving but not a lot.

Sakura Compact Plug In 12 Volt Car Fan Cooler with Screen Mount Black | eBay

if it gets chilly might have to try one of these
12v Volt CERAMIC Fan Warmer Heater Car Van Camper Boat Windscreen Demister BNIB | eBay

Thanks for taking the time to post the links for ebay , the fan looks lie a good idea.

discogal · Nov 21, 2012

ER1C said:
Spray some WD in there perhaps...

Maybe if I took the radio out I could get to where it instead of spraying it thru where the controls are . Thanks for your suggestion .

ruffday · Nov 21, 2012

discogal said:
Maybe if I took the radio out I could get to where it instead of spraying it thru where the controls are . Thanks for your suggestion .

You wont get anywhere near it.

discogal · Nov 21, 2012

ruffday said:
You wont get anywhere near it.

Ok long WD40 nozzle thru the controls it is then! Thanks for the info

ruffday · Nov 22, 2012

Take a look at this pics of one for sale on ebay and you will see that you wont get anywhere near the heater motor with WD40 unless you strip the dash.
im sure the blower motor is in the top section.

Land Rover Discovery 200tdi Heater assembly | eBay

Dippypud · Nov 22, 2012

DON'T use WD40 ...

it cleans and displaces water ... it is not a lubricant

TT spray or 3 in 1 are fine ...

ours drove us bonkers and after 3 years even spraying it didn't work ...

so we bought a replacement on eblag and spent a weekend changing it ...

yes the whole dash has to come out, so any other jobs can be done too

Make a cheat sheet ...for wiring connections ...bits of masking tape with where it came from jotted on it ...

Take photos wivs yer phone ... makes it great if your not sure of a cable route ...

http://www.landyzone.co.uk/lz/f16/discovery-200tdi-heater-fan-noisey-168646.html

LRM magazine were running an article (started in the Dec 2009 issue) on exactly this job, wivs pics ...

If you do take yours out, make sure the controls are set properly when it goes back, coz the 'flappy' bits are a pain to sort out.

ricc · Nov 22, 2012

must be possible to rig one of the cigar lighter fans above the passenger footwell so it blows air over the existing heater matrix for the winter.....just got to find where the existing fan set up pulls air in when its set to recirculate

ER1C · Nov 22, 2012

ruffday said:
You wont get anywhere near it.

I was in Defender mode, can you not get to it via the air intake under the bonnet.

ruffday · Nov 23, 2012

ER1C said:
I was in Defender mode, can you not get to it via the air intake under the bonnet.

Dont think so. its been a while since I did one but the motor part fits right up under the dash cover which is why you need to strip out the dash to get to the unit.

discogal · Nov 25, 2012

Thank you all who contributed , I really apreciate all thoughts and advice.

discogal

Active Member

ER1C

Well-Known Member

ricc

Well-Known Member

Andy Land

Well-Known Member

Funkykipper

Green Laning Activist.

discogal

Active Member

discogal

Active Member

discogal

Active Member

ruffday

Active Member

discogal

Active Member

ruffday

Active Member

Dippypud

Never Knowingly Understood

ricc

Well-Known Member

ER1C

Well-Known Member

ruffday

Active Member

discogal

Active Member

Similar threads