Take5
New Member
OK, I've fitted me sliders an me noo set of Machos in silver wheeley thingies. Couple of pics of before and after so you can see what they're like.
Where they're attached to the b/head main bolt, a pice of 5x80mm strip steel is welded on and shaved 6mm off the top for clearance. Then using an angle grinder a small notch is cut so it doesn't foul the metal piece that it the footwell frame. Hole drilled and filed, then bolted up under tension with yer jacking tube at the rear.
Where they're attached to the b/head main bolt, a pice of 5x80mm strip steel is welded on and shaved 6mm off the top for clearance. Then using an angle grinder a small notch is cut so it doesn't foul the metal piece that it the footwell frame. Hole drilled and filed, then bolted up under tension with yer jacking tube at the rear.