B

bouncerdrum

New Member

• Jun 29, 2012

• #1

Hi everyone,

I've just bought a soft rubber Bull Bar / Nudge Bar / A bar from Ebay, but it came without brackets.

I've searched the internet and can't find an outlet that sells them.

I don't mind fabricating the brackets myself - does anyone have dimensions? or can anyone point me in the right direction to buy the brackets?

Thanks for your help

 

R

Rob Dublin

Active Member

• Jun 29, 2012

• #2

If the weather would ever improve enough over the weekend for me to get the bumper off and remove the brackets remaining from my nudge bar (now removed) I'll take some pics and get some dims for you.

 

dogsbody

Very senior member

• Jun 29, 2012

• #3

bouncerdrum said:

Hi everyone,

I've just bought a soft rubber Bull Bar / Nudge Bar / A bar from Ebay, but it came without brackets.

I've searched the internet and can't find an outlet that sells them.

I don't mind fabricating the brackets myself - does anyone have dimensions? or can anyone point me in the right direction to buy the brackets?

Thanks for your help

Click to expand...

The one that I took off my P38 just had a couple of pieces of glorified meccano that bolted on the back of the top and bent over to the bolts on the slam panel. At the bottom it had two straight metal bars matching the width to the bumper bolts. The bumper bolts had been replaced with some threaded bar and spacers so that they stuck out of the bumper far enough to take the bracket and a lock nut.

 

R

Rob Dublin

Active Member

• Jun 29, 2012

• #4

Mine only has two brackets, both protrude from the bottom of the grill/top of bumper just inside the headlights.

 

B

bouncerdrum

New Member

• Jul 1, 2012

• #5

Cheers Guys!

It's a start anyway - i'll try to post pics of my solution