T

td5284

Member

• Jun 26, 2015

• #1

Ok when ever I articulate the rear axle to an extreme when offroad, the side that is compressed won't reinflate and the airbag sits on its arse. What causes this. I get the yellow dash light aswell.

 

sierrafery

Well-Known Member

• Jun 27, 2015

• #2

does it happen for both sides? ... and if yes how do you relevel it after a drop? ... describe everything cos any small detail is important

 

T

td5284

Member

• Jun 27, 2015

• #3

Well. At first it was only the compressed side offside that was deflated, then air started to exhaust out of the near side. So then they were both on there arse and wouldn't Inflate.. Nanocom showed no faults and I eventually lifted it using the sls calibration function.

 

T

td5284

Member

• Jun 27, 2015

• #4

.

 

Last edited: Jun 28, 2015

sierrafery

Well-Known Member

• Jun 27, 2015

• #5

find somebody with hawkeye or other tester cos there is a fault code logged but nanocom can't see it...i presume that the sensor on that side made tricks...check it visually and see if it's no corrosion or bad contact in the plug, DONT UNPLUG THE SENSOR WITH BATTERY CONNECTED

 

T

td5284

Member

• Jun 27, 2015

• #6

The height sensors are about 5 week old, just changed them.

 

T

td5284

Member

• Jun 28, 2015

• #7

Bump