MeatCleaverX86
Active Member
I have aquired two dents in frot drivers wing just to side of lights after a sligh off road accident. any good tips on how to remove the dents? or do you know anyone who can do this cheap ? in the swindon area.
I have aquired two dents in frot drivers wing just to side of lights after a sligh off road accident. any good tips on how to remove the dents? or do you know anyone who can do this cheap ? in the swindon area.
landroversforever
Active Member
if you are not to bothered about the wings then just push 'em out Hoboman in Faringdon might be able to help
Hoboman in Faringdon might be able to helpdiscomania
Well-Known Member
Depends how bad they are, if your going to try and do it without removing the wing then a dent puller, or hammer it out from behind if you can get at it.
If your going to need to respray, drill a little hole and put a self tapping screw in, pull the dent out with the screw then take it out and fill the hole, sand it and respray. Due to where it is, and where the seams are, you will probally get away with a can of paint and just masking off the area after the seam, the seam helps to cover the difference in the paint colours.
If your going to need to respray, drill a little hole and put a self tapping screw in, pull the dent out with the screw then take it out and fill the hole, sand it and respray. Due to where it is, and where the seams are, you will probally get away with a can of paint and just masking off the area after the seam, the seam helps to cover the difference in the paint colours.
MeatCleaverX86
Active Member
to much mud like an ice rink had no choice once i was moving lol it was tree or big ditch
MeatCleaverX86
Active Member
im not saying ive never been stuck ive came a croper before had about foot of water in the front and back when i got stuck in a dith at foxham4x4
it just a safer option or so i thought im still learning im new to the game so be kind
it just a safer option or so i thought im still learning im new to the game so be kind
