stuxj40

Active Member
Hello Landy lovers...could any one please tell me if my 2001td5 height (from side to side) can be adjusted without using testbook??.. mines a long story.. but after many problems with the rear end (air solinoid, tramp bar?? ect) the car came back to low on the near side rear... so it went back.. now its too high.....!!.. i know they aint got testbook so i need to know how... any idea would be great...by the by i'm not lazy i have looked back through the forum.. but i canny find any thing to do with my problem.. many thanks.. St
 
Hello Landy lovers...could any one please tell me if my 2001td5 height (from side to side) can be adjusted without using testbook??.. mines a long story.. but after many problems with the rear end (air solinoid, tramp bar?? ect) the car came back to low on the near side rear... so it went back.. now its too high.....!!.. i know they aint got testbook so i need to know how... any idea would be great...by the by i'm not lazy i have looked back through the forum.. but i canny find any thing to do with my problem.. many thanks.. St

as far as i understand the air system, the only way is via testbook, autotec, or nanocom....as it will need calibrating..
unless they have done something to the ride height sensor??
 
There is a second option if the out of level is not to large,simply cut out a small section of rod that connects to the axle,then you will need a drilled piece of bar to accomodate the cut rod with a grub screw in both ends,then you can finely adjust the ride height by moving the plastic lever then nip up the grub screws to maintain the height set.



Engineer:):)
 
that's a nice ideea... BUT... it will just help to level the car on the initial position of it... if u will put load in it or use ORM the level will not stay even due to the difference in the "course" of the sensors, cos the one with the shorter/longer arm will behave different, and these sensors are quite sensitive.
 
Hi Landy lovers.. many thanks for your replys on me problem... very interesting... it looks like im going to have to have it plugged in to a machine.... trouble is where i live in cornwall the local dealer is a no no.. and all the nearest independents are either comics or way to expensive... the one i use to use will want 52 quid plus vat just to plug it in... never mind adjustments..... so im a little stuffed.... a thousand thanks for you replys.......
 

Similar threads