wiltshire landyman
I’m back
i went for this one because it was a nice chunky bar that sat nice and low with the screen.
ive also had this one
same bar as above but removed the rectangle spots for round ones..didnt like the bar in the end as it sat too high and was too thin and flimsy
ive also had this one
same bar as above but removed the rectangle spots for round ones..didnt like the bar in the end as it sat too high and was too thin and flimsy
Last edited:
wiltshire landyman
I’m back
true the one i have now is well solid and sits very low ..loads better
Shifty1962
Well-Known Member
My light bar is merely a length of 50mm aluminium box section drilled and bolted to the underside of my Hannibal roof rack. Popped in some plastic end covers and Rob's your Mother's Brother. Lights are well protected and it does not interfere with using the rack. Cabling runs inside the box so all neat and tidy to boot.
hi guys im after a light bar for my defender, but on my previous defender i had a light bar i regretted fitting afterwards and looked Gareish. can i see your light bar and spot light combinations and where you got them
cheers dave.
Attachments
The Badger
New Member
wiltshire landyman, where did you get that chunky light bar from?
wiltshire landyman
I’m back
douglass motors in poole
khaos
New Member
Where is the landy? All I see is mud.
lerk
New Member
Have been known to, as long as there are no other cars in front of me or behind the car i'm aiming for... 510W tends to get the point across!
19MART82
Active Member
:doh: I meant to upload the picture thats in my avatar,there is light bar under there somewhere though
![[JP]](/data/avatars/m/29/29578.jpg?1437394565){kind=avatar}
[JP]
New Member
I dont do it, but I love it when someone doesnt switch back to dipped beam and I give them a full blast of light!
