S

sid 67

New Member
hi there iv'e just put a + 3 inch lift on my defender 90 but now when i put my foot down then change gear there's s judder can any one tell me what this is please .thanks .sid 67:confused::confused:
 
Did you change the propshafts to wide angle ones to match the lift or change the dif angle slightly to help ? if so ………..
 
Last edited:
It is the three inch lift! Take it all back off again and it will be fine. Why have you given it a 3 inch lift?
 
tosser.jpg
in my opinion...
 
thanks dr evil for saying about the propsaft .as for DIPPYPUD you shouldn't talk about your self like that you must have a small narrow mind:D:D:D:D
 
2 inch lift its more than enough i don't see the point in putting any more than that as most challenge trucks only use 2 inch springs an + 5 shocks for dislocation ... an then you will need trailing arms an as the doctor said wide angle props
 
sid 67 said:
as for DIPPYPUD you shouldn't talk about your self like that you must have a small narrow mind:D:D:D:D
Click to expand...

Had a little snigger about this anorl :doh: Will you tell him Dippy? :p

Tbh with a 3" lift I dont fancy his chances of doing anything but clinging grimly to the steering wheel :rolleyes:
 
sid 67 said:
thanks dr evil for saying about the propsaft .as for DIPPYPUD you shouldn't talk about your self like that you must have a small narrow mind:D:D:D:D
Click to expand...

Don't for a moment suppose you know what your talking about do you...:D:p;)
 
You must log in or register to reply here.

Similar threads

D
Hello from France
Replies
3
Views
609
Freddie17
Freddie17
B
Compressor low voltage
Replies
2
Views
579
Bigchrissy
B
MaxxBeard
Series 3 Series 3 2.25 diesel. Losing power
Replies
7
Views
1K
MaxxBeard
MaxxBeard
T
Kent / Sussex - Help with a Defender 90
Replies
3
Views
590
lynall
L
S
Discovery 1 4inch lift
Replies
5
Views
2K
AJC12
A