mjr92

Member
Hi all,

I've just purchased an adaptor on Ebay for the clutch master cylinder, part no. 139082. It doesn't fit, way to small. Is there a larger size? Can only see the one type listed for sale.

Mike
 
Does the clutch pipe fit it and have you correct clutch cylinder
What year S3 perhaps earlier ones have a imperial thread

Can you measure any thread sizes
These have lots bits
 

Attachments

  • IMG_3859.png
    IMG_3859.png
    703.8 KB · Views: 19
Last edited:
Does the clutch pipe fit it and have you correct clutch cylinder
What year S3 perhaps earlier ones have a imperial thread

Can you measure any thread sizes
These have lots bits
It's a 1974. As far as I know every thing is correct but it's a new vehicle to me, so who knows if somethings been changed over the years. The thread looked the same just needs to be a bigger. I'll check tomorrow whether the clutch pipe fits.
 
I had to get a pipe made up for the clutch master on my 73 S3, can't remember exactly why but different side unions vs the pipe I had.

Took it to a local hydraulics place and they make me up a new pipe the same day for a few quid.
 

Similar threads