90maniac

Active Member

• Apr 4, 2013

• #1

I have series 2 split doors for my 90 do these fit on or is it only series 3 doors anyone know (i know stupid question)
Cheers steve

 

jamesmartin

Well-Known Member

• Apr 4, 2013

• #2

they will fit ,series 2 onwards ,door latch strikers and position change and will need altering

 

90maniac

Active Member

• Apr 4, 2013

• #3

Ahhhh good, i could do with some pics from someone so i can see what im doing lol of the hinge bits aswell :-/

 

jamesmartin

Well-Known Member

• Apr 4, 2013

• #4

just bolt them on and see where striker needs to be

 

90maniac

Active Member

• Apr 4, 2013

• #5

Ahh right do i not need the hinge thing in the middle of the inside door?

 

jamesmartin

Well-Known Member

• Apr 4, 2013

• #6

ah yes door check might need some attention

 

90maniac

Active Member

• Apr 4, 2013

• #7

Do i deffinately need that or can i leave it without them?

 

jamesmartin

Well-Known Member

• Apr 4, 2013

• #8

no you dont have to fit them or you could use a chain etc ,but just watch the wind doesnt take door so far it bends edge against bulkhead

 

90maniac

Active Member

• Apr 4, 2013

• #9

Ahhhh that will explains the current paint missing on my bulkhead lol

 

rappy1

Active Member

• Apr 5, 2013

• #10

i have an early 110 with two part doors. it would be easy to use the door catch from the series. You will probably need a rivnut tool to make things work though. I will see if i can get a pick of mine for ya.

 

90maniac

Active Member

• Apr 5, 2013

• #11

Cheers rappy

 

rappy1

Active Member

• Apr 7, 2013

• #12

here you go mate

 

90maniac

Active Member

• Apr 7, 2013

• #13

Nice one pal, was it easy enough to put in, do you know where i can get these parts from?
Cheers

 

rappy1

Active Member

• Apr 7, 2013

• #14

This was factory on this vehicle as it is a very early model with the split doors.
I would suspect if you find someone selling ex MOD vehicles you will be able to get hold of the parts you need.
I would think the standard series link would be the same.

 

90maniac

Active Member

• Apr 8, 2013

• #15

Ahhh right cheers, you wouldnt happen to have a picture of the striker would you?

 

rappy1

Active Member

• Apr 9, 2013

• #16

I will see what i can do. The door lock is special to this type of door. its almost exactly the same as the anti bust style lock on a series. Main difference between the two being this does not have the lift up on the inside of the door lock. The door catch is exactly the same as the one on the rear tail door.