ONE LIFE LIVE IT. D90

Active Member

• Sep 1, 2014

• #1

Can anyone help me to seal my air box. I have a 300tdi defender and some time ago i removed the airbox and sealed all the joins in the airbox with RTV silicon ready for wading. However i have found the joint in the picture (intake from wing to airbox) isnt air tight.

Has anyone got any ideas or materials i can use to seal this join. As i say, ive tried to seal inside, allthough it is awkward.


Thanks in advance

 

cornish rattler

Well-Known Member

• Sep 1, 2014

• #2

Mite sound daft but how about smearing some silicone sealer over the joints should be water tight once its dried / cured

 

ONE LIFE LIVE IT. D90

Active Member

• Sep 1, 2014

• #3

cornish rattler said:

Mite sound daft but how about smearing some silicone sealer over the joints should be water tight once its dried / cured

Click to expand...

Thanks mate. I did actually do that originally with RTV silicon on the outside. But it didnt seem to work. Maybe some better silicon might help.

 

L

Little Butch

Active Member

• Sep 1, 2014

• #4

Tiger seal?

 

cornish rattler

Well-Known Member

• Sep 1, 2014

• #5

ONE LIFE LIVE IT. D90 said:

Thanks mate. I did actually do that originally with RTV silicon on the outside. But it didnt seem to work. Maybe some better silicon might help.

Click to expand...

Yeah i did this on my series truck but it was still a 2.1/4 petrol then not sure if a tdi will suck more air or not

 

Last edited: Sep 1, 2014