wickford90
Well-Known Member
Are series 3 88" cappings the same as a Series 2, as in are the rivet holes in the same place.
onecelledcreature
Active Member
i can't answer for sure but i would think they're pretty much the same parts.
however i replaced my rear corners, the panels either side of the back door, with ones with tailgate latches on, and i found the the holes did not line up at all.
Made me think that they were drilled onto the body rather than pre drilled, meaning they might all be different.
however i replaced my rear corners, the panels either side of the back door, with ones with tailgate latches on, and i found the the holes did not line up at all.
Made me think that they were drilled onto the body rather than pre drilled, meaning they might all be different.
darius
Active Member
The Series 3 cappings on the rear tub are punched on the inside, wheras the early 2's were solid.
I'm looking for some solid ones for my 59 88", Rare as hell unfortunately
wickford90
Well-Known Member
Do you mean they have sections stamped out, presumably they will still fit ?
darius
Active Member
Yes they will, if the rivet holes don't line up you can drill out more
Land Raver
Well-Known Member
I fitted some replacement cappings to mine last year. Some holes aligned whilst others had to be drilled.
wickford90
Well-Known Member
Sounds about right for a series.
tottot
Well-Known Member
That's the way it is.
