brockus

Active Member

• Jun 6, 2010

• #1

i am after the above and a while ago i so one on here with a ink to halford but cant find it !! on here or halfords. !!!

it is for 4 X 55w lights which are on the light bar...

i wud like 25 amp wiring with a 20 amp fuse. and a switch...

it is goin straight from lesuire battery to the lights and a switch in the cab... it is not goin to be on any other ciruit...

can any of u point me in the right direction please

cheers
anthony

 

The Mad Hat Man

Well-Known Member

LZIR Despatch Agent

• Jun 6, 2010

• #2

Yu after the wire, the diagram or wot?

 

brockus

Active Member

• Jun 6, 2010

• #3

just the kit so wire and fuse kit so i dnt av to buy one thig at a time..

i no how i am goin to wire it ... (plug it in here and see if that works...**** its on fire haha kiddin)

yeh just the bits to get it workin appart from battery

cheer for the reply
anthony

 

wickford90

Well-Known Member

• Jun 6, 2010

• #4

i done this a few weeks ago got lot of good advice on here regarding wire ratings etc.
do a search you will find what you need

 

V8_Disco

New Member

• Jun 6, 2010

• #5

fuse
relay
bit of wire
switch

maplins, will only cost about £5

 

brockus

Active Member

• Jun 6, 2010

• #6

wickford90 said:

i done this a few weeks ago got lot of good advice on here regarding wire ratings etc.
do a search you will find what you need

Click to expand...

can u please attach the link please i tried searchin as i only need the wire realy or a fuse in a kit

cheers anthony

 

wickford90

Well-Known Member

• Jun 6, 2010

• #7

http://www.landyzone.co.uk/lz/f7/spotlights-power-105372.html
try here to start with

 

brockus

Active Member

• Jun 6, 2010

• #8

cheers for that v8 disco i will look at maplins 2ora

and wickford 90 cheers and i think i will be puttin the fuses to stop the bulbs goin aswell

cheers guys.
Anthony

 

Phil_b

New Member

• Jun 7, 2010

• #9

b4 i purchase and fit my lights ont roof im gonna have to puta replay in for the road lamps previous owner put in and wired straight to the heaqdlight.... cant help but think the draw on std curcuit is unbenificial as the voltage draw decreases the light given off by the headlight????

 

sniffmydiff

New Member

• Jun 7, 2010

• #10

:hijacked:i got one on order with the lights and im fairly ok with doing it but was wondering does anyone know if you can double circuit the lights, so they will come on with full beam but also work without full beam on a dash mounted rocker switch????

I was thinking once wired into headlight harness and working double up the wireing to the lights and put on a simple direct feed to battery with each light on an individual inline fuse

Would this work?

If not can it be done??

 

PaulMc

Active Member

• Jun 8, 2010

• #11

sniffmydiff said:

:hijacked:i got one on order with the lights and im fairly ok with doing it but was wondering does anyone know if you can double circuit the lights, so they will come on with full beam but also work without full beam on a dash mounted rocker switch????

I was thinking once wired into headlight harness and working double up the wireing to the lights and put on a simple direct feed to battery with each light on an individual inline fuse

Would this work?

If not can it be done??

Click to expand...

I've replied to your other post, here -

http://www.landyzone.co.uk/lz/1106530-post2.html


.