K

Kevin Winter

New Member

• Feb 13, 2011

• #1

How easy is it to do in a 110? Looking to clean and waxoyl the chassis over my half term hols, and also wanting to fitted extended axle breathers. Lifting the floor out would make it a whole lot easier, but are there any problems to doing this?

 

storm99

Spreading Joy & Harmony

• Feb 13, 2011

• #2

Half term!! Are you 9?

Floor just bolted in...but they will be rusted tighter then a nuns fanny.

 

K

Kevin Winter

New Member

• Feb 13, 2011

• #3

No, I'm a teacher

Rusty bolts I can cope with, will start applying WD now....

 

A

andy mcd

Active Member

• Feb 13, 2011

• #4

Generally the front floor pans bolts are rusted solid and you end up hammer and chiseling it or else the grinder.

I am getting ready to re waxoyl mine but i dont plan on giving myself any extra work i find a good steam clean and then a run over the chassis witha wire brush attachment on a air die grinder cleans it up well, then it is the messy part of spraying the goo on

 

bluehaze

Well-Known Member

• Feb 13, 2011

• #5

Kevin - mine was knackered, so I drilled all the welds out and undid (snapped mostly) the bolts. Ended up replacing the floor with 3mm chequer.

 

Attachments

• 
  land rover 1 (92).jpg

  235.7 KB · Views: 674
• 
  land rover 1 (95).jpg

  201.2 KB · Views: 1,834

bluehaze

Well-Known Member

• Feb 13, 2011

• #6

Bolted the new piece in...

 

Attachments

• 
  may 1 (6).jpg

  238.9 KB · Views: 528

K

Kevin Winter

New Member

• Feb 14, 2011

• #7

Nice looking job, will bear that in mind as an option...