mikescuba

Well-Known Member

• Aug 12, 2011

• #1

Removal of Visco red fan. I have the special spanner and I know its the opposite thread but I still can't shift it. Is there some secret way to get it off without getting a hernia.

 

jamesmartin

Well-Known Member

• Aug 12, 2011

• #2

shock it undone with large hammer on spanner

 

Pikey

Dummy Ejection Facilitator..

• Aug 12, 2011

• #3

what motor? td5 is right hand thread IIRC

 

mikescuba

Well-Known Member

• Aug 13, 2011

• #4

1990, 200tdi. 110

 

R

Rean

New Member

• Aug 13, 2011

• #5

BEAT IT WITH A HAMMER works for us

 

waldershelf

Well-Known Member

• Aug 13, 2011

• #6

Rean said:

BEAT IT WITH A HAMMER works for us

Click to expand...

Wot he said it will come off, as long as you hit it in the right direction

 

L

Litch

Well-Known Member

• Aug 13, 2011

• #7

If it is stuck then providing constant pressure will just turn the belt whereas a shock will have more chance of releasing the thread.
When you put it back on use a small amount of copperslip on the thread and make it a habit to release the fan once a year to prevent it happening again.

 

Karlos28

Well-Known Member

• Aug 13, 2011

• #8

Couldn't get mine off by hand, swift knock with a tapping stick and it flew off.

 

mikescuba

Well-Known Member

• Aug 13, 2011

• #9

Thanks guys, looks like I just need a bigger hammer.
Once it's off I can then install the Kenlowe fan I have purchased.

 

mikescuba

Well-Known Member

• Aug 16, 2011

• #10

Thanks again guys. It came off after a good belt with a large hammer.
I have attached the Kenlowe fan, just have to get it wired up.
I have noticed the engine warms up much quicker and the engine seems a little more revey and a little quieter. I just hope the heaters will be a bit more efficient now in the winter time.