bruno1926 · Feb 2, 2014

Just fitted a reconditioned VCU from Bell engineering and I cant believe the difference it makes . I ordered one with the bearings and these came already fitted it made the job so much easier and quicker. I just removed the VCU from the car and supported the props on axle stands and then took the weight of the new VCU on the trolley jack it took an hour to do. Thanks to Hippo for his write up of how to do the job

"http://www.landyzone.co.uk/lz/f69/freelander-1-vcu-bearing-replacement-how-guide-156068.html "

It gave me lots of good pointers and what to check etc. Thanks to Ken at Bell engineering their customer service is second to none and very helpful.

roshe25 · Feb 3, 2014

Hi bruno1926
Please could you tell me how much it cost,I take it you had it posted as I am thinking of doing mine that way.
Thank you.

bruno1926 · Feb 3, 2014

roshe25 said:
Hi bruno1926
Please could you tell me how much it cost,I take it you had it posted as I am thinking of doing mine that way.
Thank you.

£245 that included the recon VCU the 2 support bearings and postage . If you want one I would email Ken at Bell engineering as they do have a waiting list luckily enough I dont do a lot of miles in mine so I could wait a while.

Bell engineering email address is :- info@bellengineering .co.uk

Zigzagsky · Feb 3, 2014

bruno1926 said:
Thanks to Ken at Bell engineering their customer service is second to none and very helpful.

Agree 100%. I've been in contact with Ken regarding my VCU and bearings which should be collected from me tomorrow for testing and possible refurbishment. Very helpful chap indeed.

roshe25 · Feb 4, 2014

Hi
bruno1926
That sounds a good deal to me I shall be seriously considering going down that line.
Thanks.

bruno1926 · Feb 4, 2014

roshe25 said:
Hi
bruno1926
That sounds a good deal to me I shall be seriously considering going down that line.
Thanks.

Its best to buy the VCU and bearings if possible as Ken had already fitted the bearings to the shafts so it was just a case of swapping the VCU over, it made it a lot easier to do . I cant sing the praises of Bell Engineering enough they made the entire process so easy from start to finish

PlattyR56 · Feb 4, 2014

Can I ask, what brand of bearings come fitted?

bruno1926 · Feb 4, 2014

PlattyR56 said:
Can I ask, what brand of bearings come fitted?

I didn't look to be truthful but I believe Ken at Bell Engineering wouldn't supply cheap nasty ones as it would come back on them and they aren't that kind of company their name and customer satisfaction mean everything to them

bruno1926

Active Member

roshe25

Active Member

bruno1926

Active Member

Zigzagsky

Member

roshe25

Active Member

bruno1926

Active Member

PlattyR56

New Member

bruno1926

Active Member

Similar threads