timtheenchanteruk

Well-Known Member

• Sep 24, 2013

• #1

Anyone got any pics of a 110 with the rear wings trimmed off a tad?

last twice I've been out, I've managed to catch and bend the rear wing just behind the arch.

I'm sure ive seen some pics of a 110 that's been trimmed back, but cant find any atm.

other option would be a bit of chequer, but i get the feeling that will only move the bend further up the panel when I catch it.

 

Boris113

Well-Known Member

• Sep 24, 2013

• #2

A friend of mine cut the rear corner and fitted these. Sadly no pictures but it looks smart and stops them getting bent.

LAND ROVER DEFENDER 110 EXTREME CHALLENGE OFF ROAD REAR CORNERS - LATE TYPE | eBay

I welded box section to the end of my crossmember, its taken some good hits and seems to work well. As a bonus they are strong enough to put a hi-lift under

 

Attachments

• 
  IMG_5322.JPG

  367.3 KB · Views: 1,473

timtheenchanteruk

Well-Known Member

• Sep 24, 2013

• #3

ah-ha, that look promising, will have a googlage for em fitted, cheers

 

timtheenchanteruk

Well-Known Member

• Sep 24, 2013

• #4

on a 90 the box section would be ok, but dont think it would work on a 110, not without some extra work to support the other end, there a bit more overhang.

 

E

ebbadger

Well-Known Member

• Sep 25, 2013

• #5

something like this....... from an earlier thread I posted...

well......

measured up n started chopping.....

fitted the comp rear corners on the 110

got her outside....

then after cracking a windscreen trying to fit.... arghhhhh decide to trial fit the lro soft top , the original shrank and Exmoor gave lro a brand new one... so here it is new out the box

things are getting closer to the light at the end lol

cheers steve

 

suew

Well-Known Member

• Sep 25, 2013

• #6

Tim, didn't know you caught it again last weekend

Perhaps we should just avoid Belford in future

 

timtheenchanteruk

Well-Known Member

• Sep 26, 2013

• #7

not much damage, slight bend, but pulled the arch off at that corner.
Its been the arch thats caught both times, which in turn bends the panel, both sides match now at least

thems the pics I was looking for, knew id seen some...

right, might have to get some, pay day tuesday saves me fixing it