wiltshire landyman · May 13, 2012

as sun was shining yesterday decided to create some storage in the rear of me disco

1st job was to remove the tank from the rear end to up behind the seats also done away with the sedimenter while i was at it

we then created some framework using unistrut

and also created a runner system for the spare wheel to sit on to make it easier to slide in and out

then a place for the jerry can and tools and ammo boxes

still a bit of finishing off to do but nearly there

Fatboy11 · May 13, 2012

Looks good mate, where did you get those storage boxes ? Need 1 or 2 myself.

wiltshire landyman · May 13, 2012

Fatboy11 said:
Looks good mate, where did you get those storage boxes ? Need 1 or 2 myself.

box on right is a tuff box tool box and left box is an ammo box i won on ebay that had 10 shackles 2x8m strops and 4x 2m strops in it..£40

ricc · May 14, 2012

hope youve got summit to stop them boxes sliding forward when you hit summit solid.
ammo box to the back of the head aint funny and a bungy cord aint enough.

wiltshire landyman · May 14, 2012

ricc said:
hope youve got summit to stop them boxes sliding forward when you hit summit solid.
ammo box to the back of the head aint funny and a bungy cord aint enough.

There Bolted down bungy cord is to stop the lid rattleing,not everyone bodges jobs

Co-Pang-Yang · May 14, 2012

Quality bit of work mate, have to say I do love your truck. What tyres are you running?

Chris

wiltshire landyman · May 14, 2012

Co-Pang-Yang said:
Quality bit of work mate, have to say I do love your truck. What tyres are you running?

Chris

hankook dynapro mt 35/12.50/15..pretty pleased wiv em

Co-Pang-Yang · May 14, 2012

Thats a big o' tyre for a Disco, you get any problems with catching?

lr-90 · May 14, 2012

wiltshire landyman said:
as sun was shining yesterday decided to create some storage in the rear of me disco

1st job was to remove the tank from the rear end to up behind the seats also done away with the sedimenter while i was at it

we then created some framework using unistrut

and also created a runner system for the spare wheel to sit on to make it easier to slide in and out

then a place for the jerry can and tools and ammo boxes

still a bit of finishing off to do but nearly there

Good job mate

wiltshire landyman · May 14, 2012

Co-Pang-Yang said:
Thats a big o' tyre for a Disco, you get any problems with catching?

not after the body lift

Co-Pang-Yang · May 14, 2012

Ah that explains it. You got a build thread going?

Pikey · May 14, 2012

either remove the handles from the ammo box or tape em down. they rettle like fook anorl..

Pikey · May 14, 2012

Where'd ya get the Unistrut & is it a limited supply

Deasy · May 14, 2012

redhand said:
Where'd ya get the Unistrut & is it a limited supply

I'm doing a factory strip out, got miles of the stuff if yer passing this way

psulli16 · May 14, 2012

Could I beg ad borrow some Toby

wiltshire landyman · May 14, 2012

redhand said:
Where'd ya get the Unistrut & is it a limited supply

got some left in the garage

lots of bits approx 1.3m ish
and 1x full length think about 3m

wiltshire landyman · May 14, 2012

redhand said:
either remove the handles from the ammo box or tape em down. they rettle like fook anorl..

yep they annoyed the fook out of us the weekend

Deasy · May 14, 2012

psulli16 said:
Could I beg ad borrow some Toby

Yeah course mate,

Wlm, surely it's a lot heavier than making it out of cls?

Pikey · May 14, 2012

wiltshire landyman said:
yep they annoyed the fook out of us the weekend

I find wrapping a load of gaffa tape round em does the job. & you've always got a load in the motor with the then. Should you ever need any

Richie Box · May 14, 2012

I’m back

New Member

I’m back

Well-Known Member

I’m back

Well-Known Member

I’m back

Well-Known Member

New Member

I’m back

Well-Known Member

Dummy Ejection Facilitator..

Dummy Ejection Facilitator..

Well-Known Member

Well-Known Member

I’m back

I’m back

Well-Known Member

Dummy Ejection Facilitator..

New Member

Similar threads