brianp38dse
Well-Known Member
Hello and welcome
Cheap if you do them yourself.
Cheap if you do them yourself.
Cheers any special equipment needed or can I just jack it up and set to with my spanners.Hello and welcome
Cheap if you do them yourself.
brianp38dse
Well-Known Member
Normally just jack up and support with axle stand and away you go with spanners and socket set.
but on a freelander 2 they are coil over type so will need coil spring compressors and a few other bit & bobs
best to ask over in the freelander section on the forum
https://www.landyzone.co.uk/forum/land-rover-freelander.9/
but on a freelander 2 they are coil over type so will need coil spring compressors and a few other bit & bobs
best to ask over in the freelander section on the forum
https://www.landyzone.co.uk/forum/land-rover-freelander.9/
Shippers
Well-Known Member
Why give advice then refer them to relevant section just send them there and be done with it...
thankyou I will check it out.
RangeRoller dt
Well-Sprung Member
Why not let him get on with it
All he’s said is yes it’s diy-able, heres the FL section for details
(We will badger them for pics later)
Welcome to LandyZone
All he’s said is yes it’s diy-able, heres the FL section for details
(We will badger them for pics later)
Welcome to LandyZone
