pashakuz

New Member

• Aug 29, 2012

• #1

Hi! I'm new here, and i have a question. I have a problem with cargo door latch acutator.

This plastic thing (selected on the image) is broken, but i don't want to buy a whole new part (FQR100570). Did anyone has the same problem or maybe know where to buy used part?

 

Last edited: Aug 29, 2012

thebiglad

Well-Known Member

• Aug 29, 2012

• #2

pashakuz said:

Hi! I'm new here, and i have a question. I have a problem with cargo door latch acutator.

This plastic thing (selected on the image) is broken, but i don't want to buy a whole new part (FQR100570). Did anyone has the same problem or maybe know where to buy used part?

Click to expand...

The plastic bit looks like it retains the plate - could you use a hot self-tapper and washer and screw it into the remaining plastic?

 

pashakuz

New Member

• Aug 29, 2012

• #3

Nope, tried, didn't help. It does not fix the steel lever how it should, and after one lock-unlock it's not working again (

 

C

chrismb

New Member

• Aug 29, 2012

• #4

Tap it with a 5mm machine screw and put a wing repair washer over, I had to repair mine when one of the motors gave up the ghost..it only retains the lever and does not drive it, are you loosing the pop up button or is it falling off??

 

pashakuz

New Member

• Aug 30, 2012

• #5

these 3 plastic items are gone, so when i put a wing repair washer over, it keeps the lever on it's place, but the lever is not moving

 

C

chrismb

New Member

• Aug 30, 2012

• #6

There needs to be an air gap to let the lever move, just use loctite on the screw to hold in situe..