Put a hose clamp on the flexy above the rear axle, saves the brake fluid running out 
be prepared for snapped bolts if they have not been out for a long time, can easily be done with discs and habs in place if it goes to plan, watch out for the brake pipe being corroded into the fitting and shearing off, sometimes needs a wiggle to get them free'd off.
be prepared for snapped bolts if they have not been out for a long time, can easily be done with discs and habs in place if it goes to plan, watch out for the brake pipe being corroded into the fitting and shearing off, sometimes needs a wiggle to get them free'd off.
mr glee
Active Member
use a 12 point socket on the two caliper bolts.plug the brake line the dust cap on the bleed nipple fits if its not snug use a bit of clingfilm to pack it out. use copper slip apply where the pads contact the pistons and where the pads slide on the caliper casing.make sure its all bleed out.done mine last year no probs.
