MikeDISCO

Well-Known Member

Full Member

• Jun 22, 2011

• #1

Hi Guys,

300tdi Disco, Replaced front wheel bearings, brake discs and pads on monday was fairly straight forward and I had a decent instruction to follow I found on the net.

I am planning to do the rear wheel bearing, discs and pads during the next week.

Is there anything majorly different I should be aware of? does any one have an instruction? I have done a search on here and google and couldnt
find owt.

Thanks

Mike

 

Last edited: Jun 22, 2011

jamesmartin

Well-Known Member

• Jun 22, 2011

• #2

similar job unless abs where you have to undo 5 x nut to remove abs ring before removing disc bolts ,and if you have to hammer disc off hit disc not hub it will damage easily

 

concal

New Member

• Jun 22, 2011

• #3

If yove done the front the rears are the same

 

MikeDISCO

Well-Known Member

Full Member

• Jun 23, 2011

• #4

Great thanks guys