![IMG_0765[1].JPG](/data/attachments/43/43935-a9d1e2fbec75b288c19563f8cc8d9d2d.jpg)
![IMG_0764[1].JPG](/data/attachments/43/43936-f3ae205601c105431a5a0d05cac94d43.jpg)
![IMG_0766[1].JPG](/data/attachments/43/43937-f1dd70e4e026de95887525f59bb74784.jpg)
![IMG_0763[1].JPG](/data/attachments/43/43938-26abb1254c513eacf6c8de60bd3414d5.jpg)
![IMG_0759[1].JPG](/data/attachments/43/43939-1a0636852170178fb9fceecbb6dbbf70.jpg)
![IMG_0767[1].JPG](/data/attachments/43/43940-e68e83d73f1a07ba73301330001ee53b.jpg)
blue beasty
Leaks an prone to bits dropping off
Wrong section
How much for the bungee in pic 3?
How much for the bungee in pic 3?
Stacked it
New Member
Front door hinges if they are not too worn.
What are the door bottoms like? Don't mind if the steel frame is a bit rusty as long as the Alu has not corroded.
Gearbox - how much?
That's my shoping list - let me know
Cheers
What are the door bottoms like? Don't mind if the steel frame is a bit rusty as long as the Alu has not corroded.
Gearbox - how much?
That's my shoping list - let me know
Cheers
honolulujoe
Well-Known Member
is it too far gone to save?
fireblade7
Active Member
there is nothing to far gone to save its up to the enthusait that wants to save
chassis is needing paul danials to sort
other than that it was running around town 20 years ago
regards
mike
fireblade7
Active Member
alu is ok some corrosion on bottom frames
hinges will be fine as the rear drivers door was replaced
regards
mike
