discodrivercumbria · Jul 8, 2013

going to order new rad, but which one do i need? a part no would be great! as most on-line only say compatible 98- 04

mine has now only 1 small pipe at bottom(steering box side) coming from it on the lower entry, my mat has a new rad sat in his garage but both small outlets are open, so i don't think it will fit
does anyone know which one and where is the best place as i don't think the £70.00 can be upto much, Maybe wrong?

Disc300Series · Jul 8, 2013

I've just bought one and fitted it at £76 delivered with 2 year warranty. Bought it off eBay.

discool · Jul 8, 2013

Part no.? not a problem if the year and engine was known but try PDK000080

discodrivercumbria · Jul 8, 2013

Disc300Series said:
I've just bought one and fitted it at £76 delivered with 2 year warranty. Bought it off eBay.

that's good! but which one was it? has it 2 small pipes coming off the bottom or just the 1 lower of the 2?

discodrivercumbria · Jul 8, 2013

discool said:
Part no.? not a problem if the year and engine was known but try PDK000080

04 td5, top hose, bottom hose and one small pipe coming off the very bottom small outlet, top small outlet is unused

discool · Jul 8, 2013

http://www.landyzone.co.uk/lz/f7/defender-td5-radiator-swap-problems-67503.html

discodrivercumbria · Jul 8, 2013

none of these answers tell me straight, the thread that links to last reply yes that is what i want, but want right rad, spoke to island 4x4 today, but he was no help, bit of an arsehole really, and online i found them great, but a phone call to ask which one no proper answer!

just need right part then fitting is simple process

http://www.google.co.uk/url?sa=i&so...4e12WCGYRU0hNtPt7o6skKDA&ust=1373409660817561

this is the layout

jamesmartin · Jul 8, 2013

pdk000080 is for td5 2a on

discodrivercumbria · Jul 9, 2013

jamesmartin said:
pdk000080 is for td5 2a on

stripped it out tonight, flushed it twice put it back in, still only gets hot at to hose, rest cold, car works all ok heater hot and cold wise

part no on top of rad is PCC00150 googled it and really nothing, no new rads at all

minidod · Jul 10, 2013

Try PCC001070 the other number above (PDK000080) is for rest of world.
I've attached a picture, I just hope it works.

thebiglad · Jul 10, 2013

It's very simple, if you look at your VIN the latter part of it will start with either 1A******* or 2A******.

Which is yours?

discodrivercumbria · Jul 10, 2013

thebiglad said:
It's very simple, if you look at your VIN the latter part of it will start with either 1A******* or 2A******.

Which is yours?

mine starts with an 'S' ALLTGM******, ive have looked no 1A or 2A

rad PCC001070 has 2 open bottom outlets, as well as bottom main hose, mine rad has 2 bottom outlets but only 1 is open, very bottom one, when you look at a rad for the disco they say they fit from 98 - 2004, have got an PCC001070 new one from a mate so will it fit, no not with 2 small open outlets, loose coolant!!!

so still no nearer,

jamesmartin · Jul 10, 2013

http://pl.b5z.net/i/u/6064257/f/tech._bulletin_0009.pdf

discodrivercumbria · Jul 10, 2013

jamesmartin said:
http://pl.b5z.net/i/u/6064257/f/tech._bulletin_0009.pdf

that says pcc001080, talked to a supplier today and they all sell pcc001070, never sold an 080 they tell me, everybody sells 070's
here's a diagram as to what i found and this is the same as mine!
http://www.google.co.uk/url?sa=i&so...dQINVZvPN0L8A65f8PIU-xmA&ust=1373578170509688

discodrivercumbria · Jul 10, 2013

also the guy at Britcar, talked to landrover, read them my chassis no and they told britcar PCC001070 should fit! but i don't think it will, as it will have 2 open outlets! am i right or am i wrong

jamesmartin · Jul 10, 2013

youve no fuel cooler on inlet manifold ,you allways use a hose with plug in it and hose clips or order pdk000080

discodrivercumbria · Jul 10, 2013

jamesmartin said:
youve no fuel cooler on inlet manifold ,you allways use a hose with plug in it and hose clips or order pdk000080

so basically i could make a bung and jubilee clip it?

jamesmartin · Jul 10, 2013

discodrivercumbria said:
so basically i could make a bung and jubilee clip it?

yes but youd need short piece of hose , no weaker than the rest of the pipes done well

discodrivercumbria · Jul 10, 2013

jamesmartin said:
yes but youd need short piece of hose , no weaker than the rest of the pipes done well

just looked at price of pdk000080 £200 + vat

jamesmartin · Jul 10, 2013

discodrivercumbria said:
just looked at price of pdk000080 £200 + vat

hose and bung it is then

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads