mcapinha

Active Member

• Sep 20, 2012

• #1

I've been browsing the BBS site for info on the Nanocom Evolution for my DSE and found this: http://www.blackbox-solutions.com/downloads/vehicle_coverage/EDC.pdf . It shows an option called "Pump Calibration" under EDC Management / Diesel > Settings. Can someone tell me what this is for ?

 

Datatek

Well-Known Member

• Sep 20, 2012

• #2

Pump Calibration Idle settings? Just what it say's, you can adjust the idle setting to change the idle revs.

 

mcapinha

Active Member

• Sep 20, 2012

• #3

No, if you look at the PDF you'll see that those are two separate options.

 

wammers

No longer with us, RIP

Donater

• Sep 20, 2012

• #4

If you change anything on that make sure you write down the original settings or you may end up with a can of worms. Don't change anything more than 1 or 2 points up or down. If that change has no effect set it to original. You are playing with fire.

 

mcapinha

Active Member

• Sep 20, 2012

• #5

Please understand that I don't own a Nanocom Evolution (yet). I'm just curious about what this option is for.

 

wammers

No longer with us, RIP

Donater

• Sep 20, 2012

• #6

mcapinha said:

Please understand that I don't own a Nanocom Evolution (yet). I'm just curious about what this option is for.

Click to expand...

It is explained in the text what this function is for. However as far as i recall without looking at the Nanocom screen only the idle setting is annotated. All the other settings could be anything changing them would be a little hit and miss.

 

mcapinha

Active Member

• Sep 20, 2012

• #7

OK, if you ever get the chance, could you please post that text ? I don't have access to any Nanocom and I'm just curious about it.

Thanks for your time

 

J

JotaPê

Member

• Sep 20, 2012

• #8

See here:

http://web.nanocom.it/download/P38 BOSCH EDC.pdf