HybridGirl

HybridGirl

New Member
Ok. Me UJ's knackered on me rear prop, as I told yer in a previous fred when me hand brake drum rolled off onto the hard shoulder of the M1... Anyways, Mondo happened to have a spare one which fitted ok on the back prop, but we broke it trying to fit it cos it was made by ****Part. One of the UJ's on the front prop also has a little bit of play in it. So I want to change that. The trouble is, the front propshaft has diffrent UJ's to the rear one. The UJ which was supposed to be for a 90/110 was about half an inch to short on the X pieces to fit in the yoke. I know Disco UJ's are slightly diffrent to Deepender ones, so could one of me props be off a Disco?? Anyone know the diffrences? I presume front and rear prop UJ's are normally the same??
 
HybridGirl said:
Ok. Me UJ's knackered on me rear prop, as I told yer in a previous fred when me hand brake drum rolled off onto the hard shoulder of the M1... Anyways, Mondo happened to have a spare one which fitted ok on the back prop, but we broke it trying to fit it cos it was made by ****Part. One of the UJ's on the front prop also has a little bit of play in it. So I want to change that. The trouble is, the front propshaft has diffrent UJ's to the rear one. The UJ which was supposed to be for a 90/110 was about half an inch to short on the X pieces to fit in the yoke. I know Disco UJ's are slightly diffrent to Deepender ones, so could one of me props be off a Disco?? Anyone know the diffrences? I presume front and rear prop UJ's are normally the same??
Click to expand...

I bought 2 new props a few weeks ago and the front one was slightly different to the back one. Not sure why.
 
size of Disco front uj's is 2 31/32" (75.5mm) across yoke and bearing cups are 1 1/16" (22mm) in diameter. at least mine are;).


Aw! HB - yu dint let him loose on yo motor again!? yu know he allas breaks summat;)!
 
HuN73R said:
I bought 2 new props a few weeks ago and the front one was slightly different to the back one. Not sure why.
Click to expand...

So the UJ's are diffrent dependin if there on the front or rear prop? And its not just another 'bodge it' job from my landy's previous owner?

I have to admit i, myself have done quite a few bodge jobs on my landy but they wer all good ones...:rolleyes:
 
In fact I dunt need to go out side an measure up if you tell me what the measurements are for a Deepender one?? Not that i'm bein lazy or owt.. Its cold up ere in Yarksheeeeeeeer an I dunt wanna go scrabblin about unner me landy.
 
dont thank me too soon:eek::eek: those were the dimms of the noo ones - i just checked the ones i took out and the dims are .... 75mm across yoke and 27mm cup size:rolleyes::mad:.

thinks!

had better check if noo ones will fit :rolleyes:!
 
The Mad Hat Man said:
dont thank me too soon:eek::eek: those were the dimms of the noo ones - i just checked the ones i took out and the dims are .... 75mm across yoke and 27mm cup size:rolleyes::mad:.

thinks!

had better check if noo ones will fit :rolleyes:!
Click to expand...

If you like i'll send Mondo round to fit em for you.... He's good wi stuff like tha. He'll mek em fit.:rolleyes:
 
just checked - and noo ones ARE the same as old ones - (must be differences in plastic rule;))

bearmach heavy duty joint "TVC100010R BUJ 6AR"

According to their web site the Defender and Disco ones ARE different.
 
The Mad Hat Man said:
just checked - and noo ones ARE the same as old ones - (must be differences in plastic rule;))

bearmach heavy duty joint "TVC100010R BUJ 6AR"

According to their web site the Defender and Disco ones ARE different.
Click to expand...

Thank you MHM! I knew I cud rely on you cos you is good at findin stuff out on tinternet.;)

So, on a normal Deepender 90, the front and rear UJ's shud be the same? Not diffrent like mine?
 
fook me HB - yu cud do this....

from Rimmer....

Front Propshaft

Universal Joint - front propshaft;
4 Cylinder -
Up to VIN CA252578 (1986) - (2) - RTC3346
VIN CA252578 (1986) on - (2) - RTC3458
V8 -
Up to VIN CA254406 (1986) - (2) - RTC3346
VIN CA254407 (1986) on - (2) - RTC3458

Grease Nipple - universal joint - (1) - 234532
All models.
Gaiter - propshaft sliding joint - (1) - 276484
Bolt - propshaft - (4) - 509045
Nut - propshaft - (8) - TN3209


Rear Propshaft

Universal Joint - rear propshaft;
4 Cylinder -
Up to VIN CA252578 (1986) - (2) - RTC3346
VIN CA252578 (1986) on - (2) - RTC3458
V8 -
Up to VIN CA254406 (1986) - (2) - RTC3346
VIN CA254407 (1986) on - (2) - RTC3458

Grease Nipple - universal joint - (1) - 234532
All models.
Gaiter - propshaft sliding joint - (1) - TVE100000
Bolt - propshaft - (4) - 509045
Nut - propshaft - (8) - TN3209
 
The Mad Hat Man said:
fook me HB - yu cud do this....

from Rimmer....

Front Propshaft

Universal Joint - front propshaft;
4 Cylinder -
Up to VIN CA252578 (1986) - (2) - RTC3346
VIN CA252578 (1986) on - (2) - RTC3458
V8 -
Up to VIN CA254406 (1986) - (2) - RTC3346
VIN CA254407 (1986) on - (2) - RTC3458

Grease Nipple - universal joint - (1) - 234532
All models.
Gaiter - propshaft sliding joint - (1) - 276484
Bolt - propshaft - (4) - 509045
Nut - propshaft - (8) - TN3209


Rear Propshaft

Universal Joint - rear propshaft;
4 Cylinder -
Up to VIN CA252578 (1986) - (2) - RTC3346
VIN CA252578 (1986) on - (2) - RTC3458
V8 -
Up to VIN CA254406 (1986) - (2) - RTC3346
VIN CA254407 (1986) on - (2) - RTC3458

Grease Nipple - universal joint - (1) - 234532
All models.
Gaiter - propshaft sliding joint - (1) - TVE100000
Bolt - propshaft - (4) - 509045
Nut - propshaft - (8) - TN3209
Click to expand...

Yeah I probly cud, but you do it better. ;)

And anyhow, whenever I try doin searches on tinternet, I end up wi a page of XXX rated porn. :eek:
 
And... Tha sez that the front and rear prop UJ's are the same. So It dunt help me. Cos me front ones diffrent from me back one. So yer gonna ave to come up to Yarksheeeeeeeer and tek the measurements off me front prop an tell me wot its off of. Seein as yer int busy, can yer be here by 2pm? Cos I wannit sorted asap.:D I'll mek yer a cuppa tea an get yer a donut.
 
2hrs - it took me 6 last time - tell ya wot - yu go and measure the UJ dims on ya front and rear props and i will try and find out wot they are;).













oh - an keep my donut fur when yu bring my transfer box back :D
 
Can't be arsed to read the ole fred but as far as mine is concerned all four UJs are the same an there all different to a Discos. an you can get em from most motorama type places wunt be surprised if halfords selt em neever.
 
You must log in or register to reply here.

Similar threads

dag019
which propshaft 110 rear.
Replies
3
Views
535
Hicap phill
H
Andy Warren
Freelander 1 Rear prop uj's
Replies
5
Views
780
andyfreelandy
andyfreelandy
R
Disco 2 Centre diff lock
Replies
9
Views
590
sierrafery
sierrafery
R
Ex military 90 soft top 1994 - 300TDi conversion
Replies
7
Views
619
ChristopherDailey
C
Lej
Land rover discovery 2 front prop shaft - can't find correct size
Replies
5
Views
1K
tilly2
tilly2