H

hullstorage

New Member

• Apr 23, 2007

• #1

i am looking at replacing some pop rivets to my landy 110
which ones should i use and what size
how many should i order

regards

simon

 

Trewey

Cockernee, Pasty munchin bastid.

• Apr 23, 2007

• #2

Use aluminium ones.
Most of them are 4mm and 5mm on a Deepender (there's a few 6mm).
My local farmer's supply store sells them in bags of 100 - a bag of each should be ample, unless yer goin mad wiv the chequer plate.

 

Bradj999

New Member

• Apr 23, 2007

• #3

Wurth do blind rivets they would be better I would have thought

 

H

hullstorage

New Member

• Apr 24, 2007

• #4

Treworgey 90 said:

Use aluminium ones.
Most of them are 4mm and 5mm on a Deepender (there's a few 6mm).
My local farmer's supply store sells them in bags of 100 - a bag of each should be ample, unless yer goin mad wiv the chequer plate.

Click to expand...

are these 4mm in lengh or width

i have contacted my local supplier and he has asked what lengh and width

 

H

hullstorage

New Member

• Apr 24, 2007

• #5

Bradj999 said:

Wurth do blind rivets they would be better I would have thought

Click to expand...

are these 4mm in lengh or width

i have contacted my local supplier and he has asked what lengh and width

 

D

discomania

Well-Known Member

• Apr 24, 2007

• #6

Thats wide yes... Length wise, well what are you riveting?

As long as they are going to be long enough to go through the metal and crumple up properly and not overly long for what you are riveting... Tell your supplier and he will keep you right...

 

H

hullstorage

New Member

• Apr 24, 2007

• #7

discomania said:

Thats wide yes... Length wise, well what are you riveting?

As long as they are going to be long enough to go through the metal and crumple up properly and not overly long for what you are riveting... Tell your supplier and he will keep you right...

Click to expand...

many thanks