Martin300TDi

Martin300TDi

New Member
An inspection has shown quite a few bushes that could do with replacing on the 90.

So....are polybushes the way to go and, if so, any recommendations on which to buy or where to buy 'em??

Any feedback appreciated as always. :)
 
Get bog standard ones you'll nivver get it to handle well, so yer might as well save yer money.
 
GRUNT said:
Get bog standard ones you'll nivver get it to handle well, so yer might as well save yer money.
Click to expand...

Cheers Grunt. Not really trying to improve the handling, just wanting to redo the bushes before MOT time etc. The ones that are on are rubber but poly's appear to be cheaper and I'd assumed they were superior.

I'll stick with standard hardness though as you suggest. :)
 
Get the bog standard ones, they are as cheap as chips and will do the job for much longer than any poly ones will.
I put poly bushes on a kitcar that I had, less than 5k and they were all knackered, changed back to OM and have had years of service.
I'll NEVER fit poly bushes again to any of my vehicles.
 
You must log in or register to reply here.

Similar threads

C
Land rover 110 1984 upgrades
Replies
12
Views
626
dag019
dag019
Lephreek
It gets worse..
Replies
13
Views
1K
Lephreek
Lephreek
K
First time under a landy
Replies
5
Views
557
Discodevon
Discodevon
s8ndst0rm
Transfer box clunk, low revs, whilst turning
Replies
11
Views
982
lynall
L
9
R380 Gear Selection Issue
Replies
3
Views
942
Anaconda
A