JD

New Member

• May 17, 2011

• #1

PAS fluid change on my list of maintainance jobs.

Can't see on rave how to drain the system, is it just a case of disconnecting the reservoir return and letting the system power new fluid through?

Is Dexron II ok for this or does it have to be Dexron III?
Any recommended additives for this?

 

C

Canyon

New Member

• May 17, 2011

• #2

Fairly sure its dexton3 , not sure how to drain either, but you will need 2 litres to refill.

 

JD

New Member

• May 17, 2011

• #3

Cheers for the reply Canyon.
Rave says dexron III, just had a few litres of dexron II sitting around so wondered if I could use this. Don't know how much difference there is between II and III.

 

wammers

No longer with us, RIP

Donater

• May 17, 2011

• #4

JD. said:

Cheers for the reply Canyon.
Rave says dexron III, just had a few litres of dexron II sitting around so wondered if I could use this. Don't know how much difference there is between II and III.

Click to expand...

Just take a pipe off after getting oil warm. Dexron II or III will do.