Sean1988

Active Member

• Nov 2, 2014

• #1

Afternoon all,

Does anybody know the part number for the high tensile bolts which go through the chassis where the lashing rings are at the rear. Got a 2" receiver and the arms which go to the chassis need those bolts, mine are nice and rusty so wanting to shot a set of nice new ones on there. If I can just get the bolts from the likes of b&q that will be strong enough that would be an option too, any thoughts?

 

Last edited: Nov 2, 2014

bluedog333

Well-Known Member

• Nov 2, 2014

• #2

BH2110221L ? M10x110mm are the ones

 

Sean1988

Active Member

• Nov 2, 2014

• #3

That definately looks like it, cheers iv been trying to find them all afternoon! Do you by any chance know in there the high tensile ones that won't sheer off?

 

bluedog333

Well-Known Member

• Nov 2, 2014

• #4

Should be, they hold the lashing/recovery rings in. I guess it depends on if you get genuine or cheap aftermarket ones. Alternatively get some high tensile M10s from a reliable ironmongers.

 

Sean1988

Active Member

• Nov 3, 2014

• #5

Cheer for that, Il get a few of them