P

pegibson

New Member

• Mar 22, 2011

• #1

Im after the cable that goes from heater controls on dash, through bulkhead to operate the hot/cold valve for heater.
Any ideas where to get it?

cheers

 

philvy

Well-Known Member

• Mar 22, 2011

• #2

people should get up their lazy bums and use the search on lrseries:
I've put in "Series" (first dropdown box)
and "heater cable" in search:
LOOK, I"VE ****ING FOUND IT:
BTR8736 HEATER DISTRIBUTION CABLE ASSY | shop | www.lrseries.com | L. R. Series

Now do that ten times and learn to search LRSeries. Then use the part No and check the other suppliers.

BTW thanks to opening lrseries i've seen that a bearmach steering relais is only 53 quid... I thought it was an expensive part.

 

P

pegibson

New Member

• Mar 22, 2011

• #3

Thanks

 

philvy

Well-Known Member

• Mar 22, 2011

• #4

you're welcome

 

oxides

Well-Known Member

• Mar 22, 2011

• #5

And you can find the part numbers here, in the parts book.
pdf Land Rover Manuals | Landroverweb.com

 

P

pegibson

New Member

• Mar 25, 2011

• #6

philvy said:

people should get up their lazy bums and use the search on lrseries:
I've put in "Series" (first dropdown box)
and "heater cable" in search:
LOOK, I"VE ****ING FOUND IT:
BTR8736 HEATER DISTRIBUTION CABLE ASSY | shop | www.lrseries.com | L. R. Series

Now do that ten times and learn to search LRSeries. Then use the part No and check the other suppliers.

BTW thanks to opening lrseries i've seen that a bearmach steering relais is only 53 quid... I thought it was an expensive part.

Click to expand...

I ordered it, as you found it, its the wrong part you found, you found the one from controls to heater box

 

oxides

Well-Known Member

• Mar 25, 2011

• #7

347940 is the part you need.

 

OZAWOZA

Active Member

• Mar 26, 2011

• #8

I made the same mistake and picked up a heater control cable...had difficulty finding anybody who could actually supply the correct cable as always seemed to be out of stock from the usual suspects - in the end used a defender cable instead which worked just fine