P

pants007

Active Member

• May 27, 2014

• #1

Hey guys!

Just been having a look where you fit the blanking plate kit! Its just the plate with no pipes or hoses!

1) between egr and curved metal pipe?

2) between egr and manifold?

 

J

jackmac

New Member

• May 27, 2014

• #2

IIRC there's actually 2 places you can fit it. At least there is on a 300TDi, i've got no idea what engine you're on about!

Just google land rover egr blank and you'll see where it goes.

 

P

pants007

Active Member

• May 27, 2014

• #3

300tdi! ive put it between egr and manifold! just looked online!

cheers.

 

Shifty1962

Well-Known Member

• May 27, 2014

• #4

Blank it at the manifold. You can make your own plate for pennies. I've even used a baked bean tin lid but it burns through after a couple of years. You only need the kit if you are removing the complete EGR valve assembly. Even then its not hard to make the tube for the inlet pipe yourself if you are handy with a welder.