As far as i know you can't. Putting a P38 through anything remotely deeper than it's recommended slow wade height is asking for lots and lots of problems.
 
this is the only p38 snorkel available on ebay built for p38 and its feckin hideous or you could buy a 200 tdi one and modify it to fit :D
 
Follow Datatek to 996Turbo's Range Rover Evolution website. He's in France but people over here stock his parts (although often cheaper to order direct.)

Talk to Rick-The-Pick about moving your BECM up into the roof at the back.

Probably cheaper just to get an older Defender to play offroad in?
 
He might want it for sand in fairness
Why would you want a snorkel for sand? A bigger surface area filter maybe and a repositioned intake but can't see the need for a snorkel unless you are planning to submerge in sand
 
Now if i remove the becm from that positions where is now, and put in another place i can use for wadin with a snorkel i think. Not only the BECm but even the transmitions and air system ecu, and all the other thinks that are in the bottom of the seat..
 
Now if i remove the becm from that positions where is now, and put in another place i can use for wadin with a snorkel i think. Not only the BECm but even the transmitions and air system ecu, and all the other thinks that are in the bottom of the seat..
Auto, transfer & EAS ECU would also need to be relocated.
 
Now if i remove the becm from that positions where is now, and put in another place i can use for wadin with a snorkel i think. Not only the BECm but even the transmitions and air system ecu, and all the other thinks that are in the bottom of the seat..

better putting axles on the roof and turning it on it's head :)
 
Why would you want a snorkel for sand? A bigger surface area filter maybe and a repositioned intake but can't see the need for a snorkel unless you are planning to submerge in sand

Can't you have a rear facing snorkel for sand to reduce the amount of sand/dust going into the filter?
 

Similar threads